Views:

Mustang GTX, GT or Rumble WiFi Setup

1. Turn the amplifier on.

2. Press the Menu key.

3. Scroll the Encoder to "WiFi & Bluetooth" (or simply "WiFi" on some older firmware versions) and press down the encoder to select. 

4. Select "WiFi".

5. If this is the first time you are setting up a WiFi connection, the screen will display "WIFI OFF"

mceclip2.png

6. Press the Encoder to turn "WIFI ON".

mceclip3.png

7. Scroll the Encoder to view available networks. Press the Encoder to select your preferred network. (In this example, we are selecting NETWORK 1).

mceclip4.png

8. Scroll the Encoder to "CONNECT" and press to select.

mceclip5.png

9. Scroll the Encoder to "PASSWORD" and press to select.

mceclip6.png

10. The ENTER PASSWORD screen will appear.

mceclip7.png

11. Press the 3rd soft-key (adjacent to the "X" icon) to clear the default password.

mceclip8.png

12. (Version 1.x) To enter your network password, scroll with the Encoder to choose numbers and letters. Press the Encoder to make your selections. Press the 1st soft-key next to the "Done" icon when you are finished. 

12a. (Version 2.0+) To enter your network password, scroll with the Encoder to choose numbers and letters. Press the Encoder to make your selections. Press the illuminated hardware button labeled "save"  when you are finished. 

mceclip9.png

13. Scroll the Encoder to "CONNECT" and press down to select. 

mceclip10.png

14. The "LOADING" screen will appear.

mceclip11.png

15. The selected network will have a green dot next to it to indicate a successful connection. Press the "MENU" button to navigate to the Preset window.

mceclip12.png

mceclip13.png

Note: If a WiFi network isn't available, it may be possible to set up a hotspot connection via your mobile device. See your device manual and/or service provider for instructions on how to set up a mobile hotspot.